Description
The K Rend Silicone K1 Scraped Render Coat incorporates silicone technology to leave a finely textured finish on exterior walls. This render is easily activated when mixed with water to create a reliable coating for the desired surface. This product is suitable for hand application or can be used with most render spray machines.
Key Features
- Suitable for application by hand or with a render spray machine
- Can be used in a two-coat application with a K Rend Base Coat
- Polar White colour gives gives a bright white appearance
- Impressive water-repellent properties
- Offers a finely textured finish
- Suitable for Ashlar cutting
- Ideal for larger projects
- Low maintenance finish
- Requires only one coat
Technical Information
- Amount required for one coat or 2 passes onto 7 Newton blocks: Approx. 26-32kg/m²
- Coverage: 25kg will cover approx 0.9m² (Nominal thickness of 16mm)
- Amount required over a base coat: Approx. 18kg/m²
- Capillary water absorption category: W2
- Thermal conductivity: P=50% – 0.43
- Recommended thickness: 18mm
- Compressive strength: CS 11
- 2nd coat thickness: 12-14mm
- 1st coat thickness: 6-8mm
- Pack size: Pallet of 40
- Colour: Polar White
Application Instructions
- One coat can be applied directly onto blockwork. To avoid ‘ghosting’, this should be finished to a minimum of 16mm
- Apply to a recommended thickness of 18mm in two coats
- Once set, 2mm is scraped off to achieve a thickness of 16mm
- Hollows should be filled in immediately to avoid skin forming
- Achieve line level by utilising a darby or a straight edge
Approvals
- BE EN 998-1
Are you interested in learning more about render? Check out our handy guide page for answers to questions like how much to render a house?
Reviews
There are no reviews yet.