Description
The Everbuild Pinkgrip Dry Fix Foam is a rapid-curing foam adhesive specially developed for the quick installation of plasterboard, insulation boards, roof decking and floorboards. Offering a much faster application and grab than traditional adhesives, this foam adhesive can fix up to 5 standard boards and is ready to be plastered over within just one hour.
Key Features
- Suitable for masonry, concrete, timber, metal, polystyrene, polyurethane, bitumen and asphalt
- Can be used on plasterboard, insulation boards, roof decking and floorboards
- Provides up to 30% faster installation compared to traditional adhesives
- Ideal for application on solid walls and timber or metal studding
- Can be applied directly to the board or wall for easy installation
Technical Information
- Coverage: 20-30m per 15mm bead
- Service temperature: -40 to 80°C
- Composition: Polyurethane foam
- Shelf life: 12 months
- Cure time: 24 hours
- Volume: 750ml
- Colour: Pink
Application Instructions
- Ensure surfaces are clean and free from dust, grease or contaminants before use
- Shake the can vigorously at least 20 times before use and occasionally during application
- Either apply using the attached nozzle or turn the can upside down and screw the compatible gun onto the adaptor
- Apply beads of adhesive onto the wall or board and press to seal
- Leave for at least one hour before plastering and 24 hours for full curing.
Approvals
- EN 13501
Product Disclaimer
- Please note that this product can be applied with the attached nozzle or the Everbuild Pinkgrip Dry Fix Applicator Gun
Reviews
There are no reviews yet.