Description
Product details
Product information
Field of use: For removing oily and greasy dirt deposits from solvent resistant surfaces such as natural and engineered stone, ceramics, clay and quarry tiles, concrete, etc. Suitable for indoor and outdoor use. Also suitable for removing elastic joints (silicone). Technical Data: Density: ca.0,82 g/cm³ pH-Value: n.a. Appearance: liquid, clear Odour: aromatic, orange-like Flash Point: approx. 39°C Solubility in water: emulsifiable Properties: Lithofin WAX-OFF dissolves organic dirt such as wax, oil, grease, tar, fresh paint, sealants, care product residues, etc. and allows them to be removed with water. Advice: In case of deep oil stains on natural and artificial stone, we recommend Lithofin OIL-EX. Coverage: Approx. 7 to 15m² depending on type and stubbornness of the deposits.
- Guarantee – Statutory
- Instructions for Use – Apply Lithofin WAX-OFF undiluted to the dry surface and distributed evenly. Allow the product to work for 5 to 20 minutes, brushing occasionally. When all deposits are dissolved, add some water, brush and remove the solution from the surface. On large surfaces use a squeegee or a wet and dry vac. Always rinse well with clear water. In case of stubborn deposits, repeat this procedure when the surface has dried.Please Note: the surface temperature must not exceed 25°C. Switch off under floor heating. Solvent sensitive surfaces such as rubber, paint, varnish, linoleum, asphalt, some plastics, etc. must be protected against splashes. Always try the product in an inconspicuous area prior to use.
Features and benefits
Lithofin WAX-OFF is a versatile, ready-to-use cleaner based on a highly active combination of solvents and cleaning components.
- Helps remove oily and greasy deposits
- Ready-to-use
- Deep-acting
- Contains solvents
- Wax and oil becomes water-soluble
- Suits ceramic, terracotta and stone
- Indoor and outdoor use
- Suitable for removing elastic joints
Reviews
There are no reviews yet.