Description
Product details
Product information
DSP 800 is a powerful, ‘Dichloromethane’ free multi-purpose stripper, for the removal of all coating types – Alkyd, Acrylic, PU, Epoxy, Cellulose, RSE (semi-thick coating), RPE (thick plastic coating) and more. It is a very strong stripper that can even remove 2-Pack paints and powder coatings without damaging the substrate making it perfect for a wide range of applications. Fast-acting and ready to use, DSP 800 works on all surfaces (except plastic), leaving a clean, coating free surface that can be refinished after just 6 hours. Containing no acid, caustic soda or potash, DSP800 will not darken wood and thus requires no neutralisation after use. Ideal Uses for Owatrol’s DSP 800 Stripper Removing car paint Stripping interior and exterior wood surfaces Getting rid of unwanted carpet glue Stripping paint from stone and cement walls Restrictions Do not use on plastics, GRP or other similar type surfaces – risk of dissolving surface. Avoid prolonged contact with aluminium. *Actual coverage will depend on the type of finish and numbers of coats being stripped and thickness of DSP 800 applied. Surface Preparation Remove any loose and flaking paint and brush off any physical surface contamination e.g. moss, general dirt etc. Application of Owatrol’s DSP 800 Multi-Purpose Stripper Test First apply a uniform layer of DSP 800 to a small test area, according to the coating to be stripped (see information below). Allow to work. Periodically test with a scraper to see if the finish is softening. When the coating has softened, blistered or cracked and can easily be removed then the optimal working time has been established. If after 45 min there is no result, apply again and continue the test. Application Directions Apply a uniform layer of DSP 800 according to the coating to be stripped. Allow it to work in accordance with the test carried out above. Remove the stripper and coating with a scraper or scrubbing brush. On
Reviews
There are no reviews yet.