Drybase TS Plus Tanking Slurry (20kg Grey) – Damp-Proof Coating for Brick & Concrete Walls – Waterproof Salt Barrier for Masonry.

Description

Product details

Product information

We designed Drybase TS-Plus with one goal in mind: to create a reliable all-purpose waterproofing slurry that smoothly slides off the trowel and onto the wall. Your new go-to slurry for all damp concrete and brick walls in rooms or garages and shallow domestic basements. It sticks to walls like glue, even on damp and salt-contaminated walls.

• Guarantee – Statutory
• Instructions for Use – Add 20kg of Drybase TS-PLUS Tanking Slurry powder to 3.5 – 4.5 litres of water and mix in a clean container for at least 3 minutes to a lump-free, homogeneous consistency. Use a high speed mechanical mixer. Clean the mixer with water immediately after mixing. Application Drybase TS-PLUS Tanking Slurry can be applied by trowel, brush or suitable spray equipment. Do not apply at temperatures below +5 °C, or to a frozen substrate. Depending on the slurry consistency a maximum of a 2 mm coat can be applied in one working cycle. Drybase TS-PLUS Tanking Slurry is applied in two coats. It is recommended that the second layer is applied whilst the first layer is still damp on the surface. The waiting time before applying the second layer is approx. 2 – 4 hours, depending on local climatic conditions such as humidity, temperature, etc.
• Guarantee – Statutory
• Add 20kg of Drybase TS-PLUS Tanking Slurry powder to 3.5 – 4.5 litres of water and mix in a clean container for at least 3 minutes to a lump-free, homogeneous consistency. Use a high speed mechanical mixer. Clean the mixer with water immediately after mixing. Application Drybase TS-PLUS Tanking Slurry can be applied by trowel, brush or suitable spray equipment. Do not apply at temperatures below +5 °C, or to a frozen substrate. Depending on the slurry consistency a maximum of a 2 mm coat can be applied in one working cycle. Drybase TS-PLUS Tanking Slurry is applied in two coats. It is recommended that the second layer is applied whilst the first layer is still damp on the surface. The waiting time before applying the second layer is approx. 2 – 4 hours, depending on local climatic conditions such as humidity, temperature, etc.
• Walls

Features and benefits

• Excellent adhesion and workability.
• Suitable for concrete and brick, horizontal and vertical surfaces.
• Vapour open, damp and salt barrier.
• Fast to mix.
• Trowel, brush or spray application.